Ключевые слова: flux pumps, dynamo, design parameters, HTS, REBCO, tapes, pinning centers, comparison, pinning, voltage, electrical circuit, measurement setup, pinning force, magnetic field dependence, numerical analysis, modeling
Ключевые слова: presentation, HTS, REBCO, fabrication, coated conductors, MOD process, pinning centers artificial, critical caracteristics, review
Ключевые слова: HTS, YBCO, tapes, design parameters, winding configurations, CORC cables, ac losses, numerical analysis
Ключевые слова: coated conductors, fabrication, substrate Hastelloy, buffer layers, ISD process, texture, microstructure
Ключевые слова: rotating machines, motors, HTS, YBCO, bulk, pulsed operation, fabrication, trapped field distribution, flux density, time evolution, experimental results
Ключевые слова: HTS, GdBCO, tapes, stacked blocks, magnetic flux concentration, magnetic shielding, modeling, flux density, distribution, numerical analysis
Ключевые слова: HTS, YBCO, films epitaxial, fabrication, substrate LaAlO3, powder processing, precipitation methods, optical imaging, microstructure, X-ray diffraction
Ключевые слова: HTS, REBCO, tapes, disks, stacked blocks, shielding effects, numerical analysis
Ключевые слова: HTS, YBCO, tapes, coils, power transfer, wireless, design, design parameters, frequency dependence
Ключевые слова: chalcogenide, thin films, coated conductors, fabrication, substrate metallic, PLD process, review, IBAD process, buffer layers, critical caracteristics, Jc/B curves, critical current density, angular dependence, anisotropy, X-ray diffraction, resistivity, temperature dependence, magnetic field dependence, upper critical fields, irreversibility fields, pinning force, microstructure, experimental results
Ключевые слова: coated conductors, fabrication, MOD process, cap layers, manganites, buffer layers, critical caracteristics, X-ray diffraction, roughness, surface, lattice parameter, critical current density, temperature dependence, microstructure, critical current, distribution, experimental results, HTS, YBCO
Ключевые слова: vehicle applications, power transfer, wireless, HTS, YBCO, coated conductors, coils, efficiency, experimental results
Ключевые слова: HTS, REBCO, coated conductors, coils, shielding current density, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, tapes, width, slitting, coils, winding configurations, ac losses, modeling, numerical analysis, magnetic field distribution
Ключевые слова: HTS, YBCO, coated conductors, magnets, power supply, flux pumps, test results, excitation system
Ключевые слова: HTS, YBCO, coated conductors, rings, magnets, stacked blocks, design parameters, persistent current mode, flux pumps, test results, numerical analysis
Ключевые слова: HTS, YDyBCO, doping effect, nanoparticles, nanoscaled effects, TFA-MOD process, coated conductors, fabrication, X-ray diffraction, microstructure, critical caracteristics, current-voltage characteristics, critical temperature, Jc/B curves, pinning force, magnetic field dependence, experimental results
Ключевые слова: HTS, GdBCO, coated conductors, MOD process, doping effect, fabrication, microstructure, oxygenation treatments, texture, heat treatment
Ключевые слова: HTS, YGdBCO, multilayered structures, MOCVD process, coated conductors, heat treatment, fabrication, substrate Hastelloy, buffer layers, critical caracteristics, critical current, thickness dependence, microstructure, X-ray diffraction, current-voltage characteristics, critical current density, experimental results
Ключевые слова: chalcogenide, coated conductors, PLD process, IBAD process, buffer layers, substrate metallic, resistive transition, magnetic field dependence, upper critical fields, irreversibility fields, critical caracteristics, Jc/B curves, critical current density, angular dependence, anisotropy
Ключевые слова: HTS, YBCO, films, fabrication, TFA-MOD process, precursors, heat treatment, phase formation
Ключевые слова: HTS, YGdBCO, coated conductors, MOD process, fabrication, precursors
Ключевые слова: HTS, fabrication, TFA-MOD process, YBCO, films, substrate SrTiO3, surface, crack formation, defects, microstructure
Ключевые слова: HTS, coated conductors, fabrication, buffer layers, nanoscaled effects, electrochemical process
Ключевые слова: HTS, YBCO, coated conductors, fatigue behavior, nucleation, TFA-MOD process, heat treatment
Ключевые слова: presentation, HTS, coated conductors, buffer layers, mechanical properties, stress effects, modeling, numerical analysis, substrate Ni-W, resistive transition, microstructure, critical caracteristics, critical current density, thickness dependence, films epitaxial, tensile tests, GdBCO, YBCO, multilayered structures, texture, experimental results
Ключевые слова: precursors, HTS, YBCO, fabrication, nucleation, growth rate, TFA-MOD process, coated conductors, resistance, texture, presentation
Ключевые слова: HTS, coated conductors, buffer layers, fabrication, electrodeposition, YBCO, critical caracteristics, current-voltage characteristics
Ключевые слова: HTS, REBCO, coated conductors, doping effect, MOD process, fluorine process, fabrication, texture, microstructure
Ключевые слова: HTS, review, power equipment, FCL, cables, SMES, rotating machines, generators, Maglev system, magnetic separation, propulsion system, experimental devices, MRI magnets, high field magnets, current leads, measurement technique, tapes, coated conductors, fabrication, YBCO, pnictides, electronics
Ключевые слова: MgB2, bulk, composites, critical caracteristics, fabrication, sintering, phase composition, resistive transition, Jc/B curves, measurement technique
Ключевые слова: HTS, YBCO, films, modeling computational, PLD process, critical temperature, resistance
Ключевые слова: HTS, YBCO, TFA-MOD process, fabrication, substrate LaAlO3, microstructure, quench, thickness dependence
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-W, texture, reel-to-reel process, magnetron sputtering, buffer layers, fabrication, RABITS process, resistive transition
Ключевые слова: MgB2, fabrication, doping effect, composites, in-situ process, bulk, resistive transition, critical caracteristics, Jc/B curves, pinning force
Ключевые слова: coils solenoidal, modeling, flux density, iron yoke, numerical analysis
Ключевые слова: HTS, YBCO, thin films, mechanical properties, thickness dependence, stress effects, texture, PLD process, substrate SrTiO3, microstructure, experimental results
Ключевые слова: HTS, YBCO, coated conductors, PLD process, buffer layers, reel-to-reel process, magnetron sputtering, substrate Ni-W, films epitaxial, microstructure, fabrication
Ключевые слова: MgB2, composites, bulk, resistive transition, resistivity, temperature dependence, percolation model
Ключевые слова: HTS, YBCO, coated conductors, buffer layers, substrate Ni-W, films epitaxial, PLD process, fabrication
Ключевые слова: HTS, YBCO, films, substrate LaAlO3, TFA-MOD process, resistivity, temperature dependence, critical caracteristics, Jc/B curves, fabrication
Holzapfel B., Huhne R., Thersleff T., Liu Z.Y., Cai C.B., Ying L.L., Gao B., Lu Y.M., Fan F., Reich E.
Ключевые слова: REBCO, doping effect, bulk, flux-jump stability, magnetization, experimental results, magnetic properties
Holzapfel B., Huhne R., Thersleff T., Liu Z.Y., Cai C.B., Zhang J.C., Cao S.X., Ying L.L., Gao B., Liu J.L.
Ключевые слова: HTS, YBCO, REBCO, films, substrate LaAlO3, TFA-MOD process, chemical solution deposition, fabrication
Ключевые слова: HTS, YBCO, films, substrate SrTiO3, PLD process, multilayered structures, Jc/B curves, angular dependence, pinning, experimental results, critical caracteristics, fabrication
Fuchs G., Nenkov K., Kozlova N., Cai C., Hanisch J.(haenisch@lanl.gov), Holzapfel B.(b.holzapfel@ifw-dresden.de)
Holzapfel B., He M., Eickemeyer J., Cai C., Ji L.(terryjee@mail.nankai.edu.cn), Yan S.L., Zhao X.J., Fang L., Li Y.G., Zhou T.G.
Schultz L., Huhne R., Fuchs G., Nenkov K., Cai C., Stehr V., Hanisch J.(haenisch@lanl.gov), Lyubina J., Holzapfel B.(b.holzapfel@ifw-dresden.de)
Holzapfel B., Schultz L., Huhne R., Hanisch J.(j.haenisch@ifw-dresden.de), Cai C.
Ключевые слова: HTS, YBCO, films, substrate SrTiO3, PLD process, Jc/B curves, pinning centers, nanodoping, critical caracteristics, fabrication
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.